All In 1 Hdd Docking Wlxkj-875 Driver
All in 1 HDD Docking WLXKJ-875 Driver: How to Install and Use
If you are looking for a convenient way to access and transfer data from different types of hard disk drives, you might be interested in the All in 1 HDD Docking WLXKJ-875. This device allows you to directly exchange data between 2 different type HDDs (SATA and IDE), even for different size (3.5" and 2.5") of HDD. You can also use it as a card reader and a USB hub. But before you can enjoy its features, you need to install the driver for it. In this article, we will show you how to do that and how to use the device.
Download Zip: https://urlca.com/2w3wvJ
How to Install the Driver for All in 1 HDD Docking WLXKJ-875
The driver for the All in 1 HDD Docking WLXKJ-875 is a software that allows your computer to recognize and communicate with the device. Without it, you will not be able to access the data on the HDDs or the card reader. To install the driver, you need to follow these steps:
Connect the power adapter and the USB cable to the device. Make sure the power switch is on.
Insert the CD-ROM that came with the device into your computer's CD drive. If you don't have a CD drive, you can download the driver from [this link].
Run the setup.exe file on the CD-ROM or the downloaded folder. Follow the instructions on the screen to complete the installation.
Restart your computer after the installation is finished.
Now your computer should be able to detect the device and assign a drive letter to each HDD or card slot. You can check this by opening My Computer or File Explorer and looking for new removable drives.
How to Use the All in 1 HDD Docking WLXKJ-875
Once you have installed the driver, you can start using the device to access and transfer data from different HDDs or cards. Here are some tips on how to use it:
To insert a HDD, align it with the corresponding slot (SATA or IDE) and gently push it down until it clicks into place. To remove it, press the eject button and pull it out carefully.
To insert a card, slide it into the appropriate slot (XD, TF, MS, CF, or SD) until it stops. To remove it, pull it out gently.
To copy or back up data from one HDD to another, you can use the one-touch backup function. Press and hold the OTB button for 3 seconds until you hear a beep. The LED indicator will flash while the data is being copied. When it stops flashing, the process is done.
To access data from a HDD or a card, open My Computer or File Explorer and double-click on the drive letter that corresponds to it. You can then browse, copy, delete, or edit files as you normally would.
To safely disconnect the device from your computer, right-click on the USB icon on your system tray and select "Safely Remove Hardware". Then unplug the USB cable from your computer and turn off the power switch on the device.
The All in 1 HDD Docking WLXKJ-875 is a handy tool that can help you manage your data from different sources. With its easy installation and simple operation, you can enjoy its benefits without any hassle. If you have any questions or problems with the device, you can contact [the manufacturer] for support.